User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
EQ and Dynamics
Reference Manual
61
DYNAMICS 1/2 popup window (8ch)
This window displays the settings for eight channels, including the currently-selected channel. You can
switch between eight-channel groups such as 1–8 and 9–16. Compared to the one-channel display,
fewer parameters can be controlled. This window is convenient if you want to adjust the threshold or
certain other parameters while watching the adjacent channels to the left and the right.
1 LIBRARY button
2 DEFAULT button
3 COPY button
4 PASTE bu tto n
5 COMPARE button
These buttons are the same as those on the DYNAMICS 1ch popup window.
6 Channel select button
Selects the channel that you want to control. The current channel icon and number appear on the
button, and the channel name appears immediately below the button.
7 DYNAMICS OUTPUT meters, GR meter
These meters indicate the output levels of signals after dynamics processing, and the amount of
gain reduction. If GATE is selected as the dynamics type, a three-step indicator appears,
indicating the open/close status of the gate.
If GATE is selected as the dynamics type, the indicator status means the following:
8 Dynamics graph
This graph displays the dynamics parameter values. The currently-selected dynamics type
appears below the graph. Press the graph to access the DYNAMICS 1ch popup window for that
channel.
9 THRESHOLD knob
Indicates the threshold value for the dynamics. You can use the corresponding multifunction
knobs to adjust the value.
0 DYNAMICS ON/OFF button
Switches dynamics on or off.
1 2 3 4 5
6
7
9
0
8
Type = Any type other than GATE
Type = GATE
Gate status
Red Yellow Green Off (dark)
On/Off status On On On Off
Open/Close status Close Open Open —
Amount of gain
reduction
30 dB or more less than 30 dB 0 dB —