User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Grouping and linking
Reference Manual
74
3. To select the copy-source channel, press the corresponding [SEL] key to make it
light.
The corresponding channel is highlighted in the SOURCE CH field of the window.
When you choose the copy-source channel, the DESTINATION CHs field is automatically
bolded, allowing you to select the copy-destination.
If you want to re-select the copy-source channel, press the SOURCE CH field.
NOTE
Copy settings can be made only in the order of “copy-source” → “copy-destination.”
4. To select the copy-destination channel(s), press the corresponding [SEL] key(s) to
make it light (multiple selections are allowed).
The corresponding channel(s) are highlighted in the DESTINATION CHs field of the window.
The channels that can be selected will depend on the channel you selected in step 3.
If you want to defeat all of the selected copy-destination channels, press the DESTINATION CHs
field.
5. If you have selected a MIX/MATRIX channel as the copy-source, use the buttons in
the COPY TARGET field to select the parameters you want to copy.
6. To execute the copy, press the COPY button.
The copy will be executed, and the settings will overwrite the parameters of the copy-destination
channel(s). After the copy has been executed, the SOURCE CH field and DESTINATION CHs
field will be empty.
7. To close the CH COPY MODE popup window, press the CLOSE button.
Moving the parameters of a channel
The settings of a specific input channel can be moved to a different input channel. When you execute a
Move operation, the numbering of the channels between the move-source and move-destination will
move forward or backward by one.
You can move settings between the following combinations of channels.
• Between input channels
• Between ST IN channels
1. In the Function Access Area, press the CH JOB button
to access the CH JOB menu.
2. Press the MOVE button to access the CH MOVE
MODE popup window.
1 2 3 4 5
1 5 2 3 4
Move by one.
Move
MOVE button