User Manual
Table Of Contents
- How to Use This Reference Manual
- Contents
- Function Tree
- SELECTED CHANNEL section
- Centralogic section
- Input and output patching
- Input channels
- Signal flow for input channels
- Specifying the channel name, icon and channel color
- Making HA (Head Amp) settings
- Sending a signal from an input channel to the STEREO/MONO buses
- Sending a signal from an input channel to a MIX/ MATRIX bus
- Correcting delay between channels (Input Delay)
- Channel library operations
- Output channels
- EQ and Dynamics
- Grouping and linking
- Scene memory
- About scene memories
- Using scene memories
- Editing scene memories
- Using the Global Paste function
- Using the Focus function
- Using the Recall Safe function
- Using the Fade function
- Outputting a control signal to an external device in tandem with scene recall (GPI OUT)
- Playing back an audio file that links to a scene recall
- Using Preview mode
- Monitor and Cue functions
- Talkback and Oscillator
- Meters
- Graphic EQ, effects, and Premium Rack
- I/O device and external head amp
- MIDI
- User settings (Security)
- Recorder
- Help function
- Other functions
- About the SETUP screen
- Word clock and slot settings
- Using cascade connections
- Basic settings for MIX buses and MATRIX buses
- Switching the entire phantom power supply on/ off
- Specifying the brightness of the touch screen, LEDs, channel name displays, and lamps
- Setting the date and time of the internal clock
- Setting the network address
- Initializing the unit to factory default settings
- Adjusting the detection point of the touch screen (Calibration function)
- Adjusting the faders (Calibration function)
- Fine-tuning the input and output gain (Calibration function)
- Adjusting the channel color (Calibration function)
- Adjusting the brightness of the channel name display
- Adjusting the contrast of the channel name display
- Dante audio network settings
- Using GPI (General Purpose Interface)
- Appendices
- EQ Library List
- DYNAMICS Library List
- Dynamics Parameters
- Effect Type List
- Effects Parameters
- Premium Rack Processor Parameters
- Effects and tempo synchronization
- Parameters that can be assigned to control changes
- NRPN parameter assignments
- Mixing parameter operation applicability
- Functions that can be assigned to USER DEFINED keys
- Functions that can be assigned to USER DEFINED knobs
- Functions that can be assigned to the assignable encoders
- MIDI Data Format
- Warning/Error Messages
- Electrical characteristics
- Mixer Basic Parameters
- M IDI Implementation Chart
- Index
Grouping and linking
Reference Manual
75
This popup window lets you move channel settings.
1 SOURCE CH field
This field indicates the move-source channel. While this window is displayed, press a [SEL] key
on the top panel to select an input channel. This field will indicate the selected channel.
You can move settings between monaural input channels, or between ST IN channels.
2 DESTINATION CH field
This field indicates the move-destination channel. After you select the move source, if you select
a move-destination input channel by pressing its [SEL] key, this field will display the selected
channel.
NOTE
In the case of the CL3/CL1, faders that do not exist on those models will not be shown.
3 MOVE button
Executes a move operation. After selecting the move-source channel and move-destination
channel, press this button to execute the move.
4 CLOSE button
Press this button to close the popup window and return to the previous screen.
3. To select the move-source channel, press the corresponding [SEL] key to make it
light.
The corresponding channel is highlighted in the SOURCE CH field of the window.
When you select the move-source channel, the DESTINATION CH field will automatically be
bolded, allowing you to select the move-destination.
If you want to re-select the move-source channel, press the SOURCE CH field.
NOTE
Settings for the Move operation can be made only in the order of “move-source” → “move-
destination.”
4. To select the move-destination channel, press the corresponding [SEL] key to make
it light.
The corresponding channel is highlighted in the DESTINATION CH field of the window. The
channels that can be selected will depend on the channel you selected in step 3.
If you want to defeat the selected move-destination channel, press the DESTINATION CH field.
5. To execute the move, press the MOVE button.
The settings of all channels between the move-source and move-destination will shift toward the
move-source by one channel, and the channel settings will move from the move-source to the
move-destination. When the Move has been executed, the SOURCE CH field and
DESTINATION CH field will be empty.
6. To close the CH MOVE MODE popup window, press the CLOSE button.
1 2
3
4