User Manual
Table Of Contents
- Contents
- Dynamics Parameters
- Plug-in Type List
- Effects Parameters
- EQ Preset
- Plug-in Library List
- Parameters that can be assigned to control changes
- Channel Library List
- Parameters copied when pairing
- Mixing parameter operation applicability
- CVS file format
- MIDI Data Format
- Mixer Basic Parameters
- MIDI Implementation Chart
Effects Parameters
12 RIVAGE PM series Data List
■ Echo
Two input, two output stereo delay with crossed feedback loop.
■ Analog Delay
This delay effect is based on the Yamaha E1010 analog delay.
■ Chorus
Two input, two output chorus effect.
■ Flanger
Two input, two output flanger effect.
■ Symphonic
Two input, two output symphonic effect.
Parameter Range Description
DELAY L 1.0–1350.0 ms Left channel delay time
DELAY R 1.0–1350.0 ms Right channel delay time
FB.DLY L 1.0–1350.0 ms Left channel feedback delay time
FB.DLY R 1.0–1350.0 ms Right channel feedback delay time
FB. G L –99 to +99%
Left channel feedback gain (plus values for normal-phase feedback, minus
values for reverse-phase feedback)
FB. G R –99 to +99%
Right channel feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
L→R FBG –99 to +99%
Left to right channel feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
R→L FBG –99 to +99%
Right to left channel feedback gain (plus values for normal-phase feedback,
minus values for reverse-phase feedback)
HI. RATIO 0.1–1.0 High-frequency feedback ratio
HPF THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
LPF 50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
SYNC OFF, ON Tempo parameter sync on/off
NOTE L
*1
*1. (Maximum value depends on the tempo setting)
Used in conjunction with TEMPO to determine DELAY L.
NOTE R
*1
Used in conjunction with TEMPO to determine DELAY R.
NOTE FBL
*1
Used in conjunction with TEMPO to determine FB. D L.
NOTE FBR
*1
Used in conjunction with TEMPO to determine FB. D R.
Parameter Range Description
BBD TYPE A, B, C, D, E
Adjusts the characteristics of the delay sound. The characteristics
become stronger in the order of switch A to E.
TIME RANGE 1-200, 201-600, 601-1000 Specifies the delay time range controlled via the DELAY knob.
INPUT 0.00 to 10.00 Adjusts the input gain.
BASS –15.00 to 15.00 Adjusts the signal’s low frequency range level at the input.
TREBLE –15.00 to 15.00 Adjusts the signal’s high frequency range level at the input.
DELAY
1 to 200 ms,
201 to 600 ms,
601 to 1000 ms
Adjusts the delay time.
FEEDBACK 0.00 to 10.00 Adjusts the feedback amount of the delay signal.
FREQUENCY 0.00 to 20.0 Hz Adjusts the frequency of modulation.
DEPTH 0.00 to 10.00 Adjusts the depth of modulation.
MIX 0.00 to 10.00 Adjusts the mix balance between dry and delay sounds.
Parameter Range Description
FREQ. 0.05–40.00 Hz Modulation speed
AM DEPTH 0–100% Amplitude modulation depth
PM DEPTH 0–100% Pitch modulation depth
MOD. DLY 0.0–500.0 ms Modulation delay time
WAVE Sine, Tri Modulation waveform
SYNC OFF, ON Tempo parameter sync on/off
NOTE
*1
*1.
Used in conjunction with TEMPO to determine FREQ.
Parameter Range Description
FREQ. 0.05–40.00 Hz Modulation speed
DEPTH 0–100% Modulation depth
MOD. DLY 0.0–500.0 ms Modulation delay time
FB. GAIN –99 to +99%
Feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
WAVE Sine, Tri Modulation waveform
SYNC OFF, ON Tempo parameter sync on/off
NOTE
*1
*1.
Used in conjunction with TEMPO to determine FREQ.
Parameter Range Description
FREQ. 0.05–40.00 Hz Modulation speed
DEPTH 0–100% Modulation depth
MOD. DLY 0.8–500.0 ms Modulation delay time
WAVE Sine, Tri Modulation waveform
SYNC OFF, ON Tempo parameter sync on/off
NOTE
*1
*1.
Used in conjunction with TEMPO to determine FREQ.