User Manual

Effects Parameters
22 RIVAGE PM series Data List
■ Amp Simulate
One input, two output guitar amp simulator.
■ OpenDeck
It emulates the tape compression created by two open reel tape recorders (a recording deck and a
playback deck.) You can change the sound quality by adjusting various elements, such as the deck type,
tape quality, playback speed, etc.
GEQ RACK
■ 31 Band GEQ
This is a 31Band GEQ.
■ Flex15 GEQ
Only 15Band of the 31Band GEQ is available.
■ 8Band PEQ
This is similar to the 8Band PEQ available in the channel module, but enables you to use a 4Band notch
filter.
Parameter Range Description
AMP TYPE
*1
*1. STK-M1, STK-M2, THRASH, MIDBST, CMB-PG, CMB-VR, CMB-DX, CMB-TW, MINI, FLAT
Guitar amp simulation type
DST TYPE
DST1, DST2, OVD1,
OVD2, CRUNCH
Distortion type (DST = distortion, OVD = overdrive)
DRIVE 0–100 Distortion drive
MASTER 0–100 Master volume
BASS 0–100 Bass tone control
MIDDLE 0–100 Middle tone control
TREBLE 0–100 High tone control
N. GATE 0–20 Noise reduction
CAB DEP 0–100% Speaker cabinet simulation depth
EQ F 100 Hz–8.00 kHz EQ (peaking type) frequency
EQ G –12.0 to +12.0 dB EQ (peaking type) gain
EQ Q 10.0–0.10 EQ (peaking type) bandwidth
Parameter Range Description
REC DEC
Swss70, Swss78, Swss85,
Amer70
Selects the recording deck type.
REC LVL –96.0 to +18.0 dB
Adjusts the input level of the recording deck. As you raise the level, tape
compression is generated, which narrows the dynamic range and distorts
the sound.
REC HI –6.0 to +6.0 dB Adjusts the high range gain of the recording deck.
REC BIAS –1.00 to +1.00 Adjusts the bias of the recording deck.
REPR DEC
Swss70, Swss78, Swss85,
Amer70
Selects the playback deck type.
REPR LVL –96.0 to +18.0 dB Adjusts the output level of the playback deck.
REPR HI –6.0 to +6.0 dB Adjusts the high range gain of the playback deck.
REPR LO –6.0 to +6.0 dB Adjusts the low range gain of the playback deck.
MAKE UP Off, On
When you adjust the REC LVL, the REPR LVL reflects the change,
maintaining the relative output level. You can change the amount of
distortion without changing the output level.
TP SPEED 15ips, 30ips Selects the tape speed.
TP KIND Old, New Selects the tape type.
Parameter Range
FREQUENCY
20Hz to 20kHz
(20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200,
250, 315, 400, 500, 630, 800, 1k, 1.25k, 1.6k, 2k,
2.5k, 3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k, 16k, 20k)
GAIN
LIMIT ±15dB –15 to +15 (dB)
LIMIT ±12dB –12 to +12 (dB)
LIMIT ±6dB –6 to +6 (dB)
LIMIT –24dB –24 to 0 (dB)
Parameter Range
EQ
Number of bands 8
TYPE PRECISE, AGGRESSIVE, SMOOTH, LEGACY
FREQUENCY 20 to 20.0k (Hz)
GAIN –18 to +18 (dB)
Q 0.1 to 16.0
Q (PRECISE LSF, HSF) 0.1 to 10.0
LSF/PEQ Band 1
HSF/PEQ Band 8
NOTCH
Number of bands 4
FREQUENCY 20 to 20.0k (Hz)
Q 0.1 to 63.0