User Manual

Mixer Basic Parameters
65 RIVAGE PM series Data List
■ Output Function (MIX)
■ Output Function (STEREO)
■ INSERT/RACK
Dynamics
EXPANDER
THRESHOLD –60.0 to 0.0 (dB)
RATIO 1:0 to ∞:1
ATTACK 0 to 120 (msec)
RELEASE 3.34m to 42.7 (sec)
OUTGAIN –20.0 to +40.0 (dB)
KNEE Hard, Soft-1, Soft-2, Soft-3, Soft-4, Soft-5
DUCKING
THRESHOLD –72.0 to 0.0 (dB)
RANGE –∞, –72.0 to 0.0 (dB)
ATTACK 0 to 120 (msec)
HOLD 0.02m to 1.96 (sec)
DECAY 3.34m to 42.7 (sec)
KEY IN
SOURCE SELF PRE EQ, SELF POST EQ, OTHER PRE EQ, DIRECT INPUT
FILTER TYPE HPF, BPF, LPF
FILTER FREQUENCY 20 to 20.0k (Hz)
FILTER Q (BPF) 0.1 to 10.0
INSERT
Number of inserts 2x4
POINT PRE FILTER, PRE EQ, PRE DYN, PRE DELAY, POST FADER, POST ON
OUTPUT BALANCE
(SIGNAL TYPE STEREO)
POSITION L63 to R63
DELAY TIME 0 to 1000 (msec)
FADER –∞, –138 to 10.0 (dB)
On ON, OFF
DCA GROUP
Number of groups 24
LEVEL –∞, –138 to 10.0 (dB)
MUTE GROUP
Number of groups 12
MASTER LEVEL –∞, –138 to –3.0 (dB)
Function Parameter
Function Parameter
PAN/BALANCE
POSITION L63 to R63
CSR (LCR PAN) 0 to 100 (%)
MATRIX SEND
Number of buses 36
POINT PRE, POST
PRE POINT PRE FILTER, PRE EQ, PRE DYN, PRE DELAY, PRE FADER
POST POINT POST FADER, POST ON
SIGNAL TYPE STEREO, MONOx2
BUS TYPE VARI
PAN LINK (SIGNAL
TYPE STEREO)
ON, OFF
LEVEL –∞, –138 to 10.0 (dB)
TO STEREO
ON TO STA, TO STB, TO LCR
POINT PRE FILTER, PRE EQ, PRE DYN, PRE DELAY, PRE FADER, POST FADER
Function Parameter
STEREO B MONO MONO, STEREO
MATRIX SEND
Number of buses 36
POINT PRE, POST
PRE POINT PRE FILTER, PRE EQ, PRE DYN, PRE DELAY, PRE FADER
POST POINT POST FADER, POST ON
SIGNAL TYPE STEREO, MONOx2
BUS TYPE VARI
PAN LINK (SIGNAL
TYPE STEREO)
ON, OFF
LEVEL –∞, –138 to 10.0 (dB)
Function Parameter
INSERT (INPUT,OUTPUT) REVERB, DELAY/MOD, EQ/DYNAMICS, GEQ/PEQ, OUTBOARD
INSERT (MONITOR, CUE,PHONES) REVERB, DELAY/MOD, EQ/DYNAMICS, GEQ/PEQ
SEND/RETURN REVERB, DELAY/MOD, EQ/DYNAMICS