User Manual
Table Of Contents
- Contents
- Dynamics Parameters
- Plug-in Type List
- Effects Parameters
- EQ Preset
- Plug-in Library List
- Parameters that can be assigned to control changes
- Channel Library List
- Parameters copied when pairing
- Mixing parameter operation applicability
- CVS file format
- MIDI Data Format
- Mixer Basic Parameters
- MIDI Implementation Chart
Mixer Basic Parameters
66 RIVAGE PM series Data List
■ OSCILLATOR
■ Output Port
■ Input Port
Function Parameter
MODE SINE WAVE, SINE WAVE 2CH, PINK NOISE, BURST NOISE
LEVEL –96 to 0.0 (dB)
SINE WAVE FREQUENCY 20 to 20k (Hz)
PINK NOISE/BURST NOISE
HPF FREQUENCY 20 to 20k (Hz)
LPF FREQUENCY 20 to 20k (Hz)
BURST NOISE
WIDTH 100 to 10000 (msec)
INTERVAL 1 to 30 (sec)
Function Parameter
DELAY 0 to 1000 (msec)
PHASE Normal/Reverse
GAIN –96 to +24 (dB)
TRIM –1.50 to +1.50 (dB)
SRC (AES/EBU) SAME AS INPUT, 44.1kHz, 48kHz, 88.2kHz, 96kHz
Function Parameter
OMNI IN
HA
+48V ON, OFF
GAIN –6 to +66 (dB)
SILK
TYPE RED, BLUE
TEXTURE 0.0 to 10.0
HPF FREQUENCY 20 to 2k (Hz)
M/S DECODE SIDE GAIN MONO, –90 to –0.1, STEREO, +0.1 to +9.9, EXP.ST
TRIM –1.50 to +1.50 (dB)
AES/EBU
PHASE Normal/Reverse
SRC ON, OFF
M/S DECODE SIDE GAIN MONO, –90 to –0.1, STEREO, +0.1 to +9.9, EXP.ST
MY SLOT PHASE Normal/Reverse
TALKBACK IN
HA
+48V ON, OFF
GAIN –6 to +54 (dB)
HPF FREQUENCY 20 to 2k (Hz)
PHASE Normal/Reverse