User Manual
Table Of Contents
- PRECAUTIONS
- Contents
- Introduction
- System Overview
- About Dante
- About Connections
- Part Names & Functions
- Power Supply
- Installing and Removing Optional Cards
- Touch Screen
- Quick Guide
- Basic system configuration
- Installing an optional card
- Setting the Unit ID
- Connecting the devices
- Turning on the power to the RIVAGE PM10 system
- Setting the word clock
- Assigning channels to the TWINLANe network
- Patching the input ports
- Patching the output ports
- Setting the analog gain for HA (Head Amp)
- Sending an input channel signal to the STEREO bus
- Check list
- Other Operations
- Troubleshooting
- Specifications (CS-R10, CS-R10-S)
- Index
RIVAGE PM10 System Setup Guide
27
1 PIN indicator
Lights when the Pinning function for the [TOUCH
AND TURN] knob is ON.
(This feature will be supported by a future update.)
2 [TOUCH AND TURN] knob
Controls the parameter of the knob you are touching
on the touch screen.
3
Channel strip encoder display
Indicates the function that has been assigned to the
channel strip encoder.
4 UP [U]/DOWN [D] keys
Enable you to select the function that you want to
control using the channel strip encoder.
5 [SHIFT] key
Combine with another key to perform a certain
function.
The following table shows examples of using the
[SHIFT] key combined with another key. For more
information, please refer to the Operation Manual.
6 [SENDS ON FADER] key
Turns SENDS ON FADER mode on and off.
7 INPUT [1-72]/[73-144] keys
Enable you to select an input layer.
8 OUTPUT [MIX]/[MATRIX] keys
Enable you to select an output layer.
9 [DCA] key
Enables you to select a DCA layer.
) CUSTOM [1]/[2] keys
Enable you to select a custom layer. You can assign
custom faders of two banks (total of 12 layers) to each
custom layer.
! Layer display
Indicates the selected layer.
1
3
5
6
7
8
9
)
!
#
2
@
4
Procedure Function
Press and hold down the
[SHIFT] key and press the
[CUE] key, and then
release the [SHIFT] key.
To switch cues as the
channel’s send destination.
(A ➝ B ➝ A&B ➝ A)