User Manual

MonitorMix V1.3 User Guide 4
Operating environment
OS iOS 11.0 or later, Android 6 or later
Hardware iPhone 5S or later, iPod touch 6th generation or later, iPad Air or later
Nexus 5/6/7(2013)/9/5X/6P is recommended for Android
Supported mixers and rmware Yamaha RIVAGE PM series V4.00 or later, CL/QL series V4.00 or later, TF series V1.12 or later
Wi-Fi settings
Configure Wi-Fi access point as instructed in the manual provided with your device. While no special settings are required, we recommend
setting up WPA2 or a similar form of security to prevent illicit access to your network from an external source.
Please refer to the following settings.
1. Assign the desired Wi-Fi network name (also called an “SSID”) to the Wi-Fi access point.
2. Select a wireless security protocol (WPA2, etc.) and set a password to the Wi-Fi access point.
3. Select the wireless mode (802.11n or ac).
4. When using “802.11n”, select the wireless band (2.4 or 5GHz).
5. If your Wi-Fi access point supports “Auto Channel Selection”, enable it.
This allows the wireless access point to automatically select the wireless channel with the least amount of interference.
We recommend selecting a 5GHz 802.11n or ac network for faster connections between your smart device and the Wi-Fi access point.
Additionally, using external antennas with your Wi-Fi access point (if supported) will make wireless connections to the access point more
reliable.