User Manual

Connecting Yamaha Dante devices with AES67
6
2. Make the input patches from the non-Dante AES67 devices as usual.
Click the channel intersections in the grid, or drag and drop in the Device View Receive
window.
Dante Controller cannot make any patch to the non-Dante AES67 devices, because only
the multicast audio flows coming from non-Dante AES67 devices can be found by Dante
Controller, not the devices themselves. In other words, Dante Controller can only create
AES67 multicast flows sent from the Dante devices, and patch the AES67 multicast flows
which are sent from the non-Dante devices to the Dante devices.
Making the patches to the non-Dante devices
Dante Controller cannot make the patches to the non-Dante AES67 devices as described
above. For details, please follow the instructions provided by the device manufacturer.
Clocking Notices
AES67 mode on a Dante device enables both IEEE 1588 Precision Time Protocol (PTP) v1
and v2. A single clock domain must be created across both PTP v1 and v2 devices:
 Standard Dante devices support PTP v1 only
 AES67-enabled Dante devices support PTP v1 and PTP v2