User Manual

ManualsBrandsYamaha ManualsMixing DesksSeries RIVAGE PM

EQ Type parameter set

Dynamics Type parameter set

Send Level parameter set

Send Pan parameter set

(for stereo Mix/Matrix buses)

Send Pre/Post parameter set

Send On/Off parameter set

Send or Direct Out Follow parameter set

(Direct Out in the CH Parameter / Direct Out 12CH overview)

PARAMETER SET FOR MULTIPLE CHANNELS

Special Key Commands

Firmware V4.0

Hold

Tap

Mix Bus Send On/Off parameter set

(for xed Mix buses)

Temporary channel link

(press any SEL key to release the linked channels again)

Bank Link parameter set

(Theatre mode only)

You can select whether the individual

[SHIFT] keys on the bays of the control

surface affect the corresponding bay inde-

pendently, or one [SHIFT] key affects all

bays.

This is especially useful when multiple oper-

ators are working on the console.

(Preferences > Surface settings 2)

Summary of content (5 pages)

PAGE 1
Special Key Commands Firmware V4.0 You can select whether the individual [SHIFT] keys on the bays of the control surface affect the corresponding bay independently, or one [SHIFT] key affects all bays. This is especially useful when multiple operators are working on the console.
PAGE 2
+ Set TO ST A and B for multiple channels + Set TO ST A and B for multiple channels + Set TO ST A and B for multiple channels SELECTED CHANNEL SHORTCUT PM10/PM7 PM5/PM3* * The numbers are not printed on the PM5/PM3 panel.
PAGE 3
SCENE MANAGEMENT + Create a sub scene Change the sub scene number when storing + Toggle overlay On/Off Toggle overlay edit On/Off + Temporarily recall safe the selected channel Show current scene MIX MINUS + Assign the mix minus owner channel(s) PLUG-IN ASSIGNMENT Scroll to the next Plug-In or next free space when mounting a plug-in + Screen encoder 12 or Touch and Turn RECORDING PATCH + Independently set Playback In and Recording Out Patch (otherwise they are linked)
PAGE 4
SETUP/SYSTEM Reset screen backlight brightness to default Setup custom fader bank + (A custom fader bank must be selected beforehand) DCA + DCA group assign + Toggle CUE group ( A  B  A+B  ) (in SURFACE SETTINGS / CUE OPERATION MODE / CH mode only) + Toggle CUE group ( A  B  A+B  ) + Sends on Fader mode without SoF selection window + Show these Mix/Matrix sends in the Channel Overview Screen + Toggle between Scene Title and Scene Comment (in SURFACE SETTINGS / CUE OPERATION MODE / CH
PAGE 5
CUE Clear Cue + CHANNEL LINK Adjust the level of the channel assigned to a link group + CHANNEL PAIR + Create/Destroy pair channels Neighbor channels PORT IDENTIFY Source port of Rpio blinks FADER BANK Toggle the layer between CH145-288 and CH1-144 PM10/PM7 PM5/PM3 Turn the CUSTOM mode On/Off* The CUSTOM key blinks in the CUSTOM mode. PM10/PM7 PM5/PM3 Lock or unlock the CUSTOM mode* The CUSTOM key lights up when the CUSTOM mode is locked.