User Manual

CONTENTS
Part names & functions
11 RIVAGE PM StageMix User Guide
HOME screen menu
The following items are available in the context menu of the HOME screen.
CH Copy: Stores the settings for the currently-selected channel in the copy buffer.
CH Paste: Pastes the channel settings stored in the copy buffer to the currently-selected channel.
CH Default: Initializes the settings for the currently-selected channel.
Sends Copy: Stores in the copy buffer the parameters associated with the currently-selected MIX or MATRIX channel (i.g., send levels, send
on/off, pan/balance, and send points).
Sends Paste: Pastes the parameter settings stored in the copy buffer to the currently-selected MIX or MATRIX channel.
■ Fader mode
You can select the fader indication mode
from NORMAL, SENDS (SENDS ON
FADER), GAIN, and SILK by using the
Fader mode buttons. NORMAL is the
default setting at the time of the
application startup.
When the fader indication mode is set to
NORMAL, GAIN, or SILK, a stereo
channel is shown at the right edge of the
main area. By swiping this area to the left
or right, you can switch the indication
between ST A and ST B.
When the fader indication mode is set to
SENDS, the send-destination output
channel is shown at the right edge of the
main area.
NORMAL
SENDS
GAIN SILK
When NORMAL, GAIN, or SILK is selected When SENDS is selected