User Manual

CONTENTS

Part names & functions

12 RIVAGE PM StageMix User Guide

NORMAL

1 Processing area

Displays the channel EQ, DYN, INSERT, DELAY, PAN, or SURROUND PAN.

For EQ, DYN, DELAY or SURROUND PAN, tap this area to switch to a screen that enables you to edit

parameters for the SELECTED CH screen.

For INSERT, tap the area to display the plug-ins that have been assigned to INSERT1 and INSERT2. Tap the

plug-ins to open the INS screen.

For PAN, press and hold down the PAN value, and then drag the value to edit.

NOTE

SURROUND PAN is displayed only when the RIVAGE PM series console is in surround mode.

2 ON button

Switches the channel on or off. This button lights up when it is turned on.

While the channel is turned on, the button will flash if a mute group (that includes this channel) is turned on.

The button will also flash if a DCA group (that includes this channel) is turned off.

3 CUE button

Tap this button to turn the channel’s cue on or off. The button lights up when it is turned on. To edit the cue,

use the Cue Operation Mode setting in the PREFERENCE screen. This button works as the SOLO button in

Solo In Place mode, and lights up red when it is turned on.

4 Fader

Drag the fader’s knob up or down to adjust the fader level. The fader stops at the nominal level (0 dB). You can

then continue to drag it up or down as desired. You can drag the fader left and right and then up and down to

adjust it more precisely.

You can adjust multiple faders at the same time.

NOTE

If Fader 0dB Detent is turned off in the PREFERENCE screen, the fader will not stop at the nominal level.

5 Meter display

Two meters are displayed for paired channels.

6 Fader value

Displays the value of the current fader level. You can tap the value and

then increase or decrease it by tapping the up or down arrow.

7 Channel name area

Displays the channel’s ID number, name, icon, and color.

If two channels are assigned as a stereo pair, you can tap this area repeatedly to toggle the displayed channel

name.

Double-tap the area to open the CH NAME screen.

EQ DYN INSERT DELAY SURROUND PAN