User Manual

CONTENTS

Part names & functions

13 RIVAGE PM StageMix User Guide

SENDS (SENDS ON FADER)

Send destination list

Tap the send destination indicator next to the Fader mode switch button to display the send destination list.

1 MIX/MATRIX switch buttons

Switches the send destination list. The button for the currently-selected channel lights up.

Stereo pair channels will be surrounded by a white box.

1 PRE button

Switches between Pre Fader and Post Fader. The button lights up when it is turned on.

On: Pre Fader

Off: Post Fader

Press and hold down the button to display the following menu items: Select one of the menu items. The

confirmation message will appear. Tap the OK button to select Pre or Post for the desired channel(s) all

together as a group.

All Mix/Matrix busses PRE for this channel

All Mix/Matrix busses POST for this channel

Current Mix/Matrix bus PRE for all channels

Current Mix/Matrix bus POST for all channels

2 SEND ON button/CH ON button

The SEND ON button switches the send for the specified destination channel on or off.

The CH ON button switches the channel on or off.

Use the “[ON] Keys Function during SOF” in the PREFERENCE screen to assign a function to this key. The

button lights up when it is turned on.

3 CUE button

Tap this button to turn the channel’s cue on or off. The button lights up when it is turned on. To edit the cue,

use the Cue Operation Mode setting in the PREFERENCE screen. This button works as the SOLO button in

Solo In Place mode, and lights up red when it is turned on.

4 Fader

Enables you to adjust the send level or send pan for the specified destination channel.

5 Send level value

Displays the current send level or send pan value. You can tap the value and then increase or decrease it by

tapping the up or down arrow.

6 Channel name area

Displays the channel’s ID number, name, icon, and color.