User Manual

RY16-ML-SILK
General Specifications
Measured with an RPio622
DIGITAL OUT refers to the AES/EBU OUT of an RY16-AE inserted in another slot of the RPio622.
Output impedance of signal generator: 150 ohms
Frequency Response
Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz @ 20 Hz – 20 kHz, reference to the nominal output level (-20dBFS) @ 1 kHz
Total Harmonic Distortion
Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Total Harmonic Distortion is measured with an IHF-A filter.
Hum & Noise
Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Hum & Noise is measured with an IHF-A filter.
Crosstalk
@1 kHz Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Reference level is -1dBFS (N).
• Crosstalk is measured with an IHF-A filter.
Sampling Frequency
Temperature Range
Specifications
Input Output Conditions Min. Typ Max. Units
CH1 – 16 DIGITAL OUT
GAIN: +66dB -0.5 – 0.5 dB
GAIN: -6dB -0.5 – 0.5 dB
Input Output Conditions Min. Typ Max. Units
CH1 – 16 DIGITAL OUT
-1dBFS output @ 1 kHz, GAIN: +66dB – – 0.05 %
-1dBFS output @ 1 kHz, GAIN: -6dB – – 0.05 %
Input Output Conditions Min. Typ Max. Units
CH1 – 16 DIGITAL OUT
Rs=150 Ω, GAIN: +66dB – -86 – dBFS
Rs=150 Ω, GAIN: -6dB – -116 – dBFS
From/To To/From Conditions Min. Typ Max. Units
CH N CH (N-1) or (N+1) Adjacent inputs, GAIN: -6dB – – -90 dB
Conditions Min. Typ Max. Units
Frequency Range Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz -1000 – +1000 ppm
Conditions Min. Typ Max. Units
Temperature Range
Operating temperature range 0 – 40 °C
Storage temperature range -20 – 60 °C