User Manual

Crosstalk
@1 kHz Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Reference level is 23dBu.
• Crosstalk is measured with a 30dB/octave filter @ 22 kHz.
Sampling Frequency
Temperature Range
Analog Output Characteristics
*1 0dBu is referenced to 0.775 Vrms.
*2 1=GND, 2=HOT, 3=COLD
*3 All DA converters are 24 bit linear, 128 times oversampling. (Fs=44.1 kHz, 48 kHz) / 64 times oversampling. (Fs=88.2 kHz, 96 kHz)
*4 +20dBu output level is also available by hardware modification. Please contact the Yamaha representative or authorized distributor
in your region.
Dimensions (W x H x D) and Net Weight: 405 mm x 42 mm x 258 mm, 1.5 kg
Included Accessories: Owner’s Manual
RY16-AE
General Specifications
Sampling Frequency
Temperature Range
From/To To/From RL Conditions Min. Typ Max. Units
CH N CH (N-1) or (N+1) 600 Ω Adjacent outputs – – -100 dB
Conditions Min. Typ Max. Units
Frequency Range Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz -1000 – +1000 ppm
Conditions Min. Typ Max. Units
Temperature Range
Operating temperature range 0 – 40 °C
Storage temperature range -20 – 60 °C
Output
Terminals
Actual
Source
Impedance
For Use with
Nominal
Max. Output
Level Select
SW
*4
Output Level
Connector
Balanced /
Unbalanced
Nominal
(-20dBFS)
Max
(0dBFS)
CH 1 – 16 75 Ω 600 Ω Lines
+24dBu (default) +4dBu (1.23 V) +24dBu (12.3 V)
XLR-3-32
type
*2
Balanced+18dBu -2dBu (0.616 V) +18dBu (6.16 V)
+15dBu -5dBu (0.436 V) +15dBu (4.36 V)
Conditions Min. Typ Max. Units
Frequency Range Fs=44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz -1000 – +1000 ppm
Conditions Min. Typ Max. Units
Temperature Range
Operating temperature range 0 – 40 °C
Storage temperature range -20 – 60 °C