User Manual

CS-R3 Owner’s Manual
13
B UTILITY section
1 USB port
Enables you to connect a USB device (such as a
mouse, keyboard, or USB flash drive). Use a USB
flash drive to store the system’s internal data and to
load the stored data into the system.
■ Supported USB ash drive format
The FAT16 and FAT32 formats are supported.
■ Write Protection
Some USB flash drives feature write protection that
prevents data from being erased inadvertently.
If your USB flash drive contains important data, we
suggest that you use write protection to prevent
accidental erasure.
On the other hand, you will need to make sure that
your USB flash drive’s write-protect setting is turned
off before you save data onto the USB flash drive.
For the latest information on which USB flash drives
can be used with the system, visit the Yamaha Pro
Audio global website at:
http://www.yamahaproaudio.com/
NOTICE
Do not remove the USB flash drive from the USB
connector or turn off the power to the unit while the unit is
accessing data, e.g., saving, loading or deleting data.
Doing so may damage your flash drive, or may damage the
data in the unit or on your media device.
2 RECORDING port
Enables you to connect a USB flash drive to record
and play back audio files. Supported file formats
include WAV and MP3.
For the latest information on what USB flash drives
can be used with the system, visit the Yamaha Pro
Audio global website at:
http://www.yamahaproaudio.com/
3 TALKBACK [ON] key
Switches the Talkback function on or off.
4 TALKBACK [LEVEL] knob
Adjusts the Talkback input level.
5 POWER Indicator
Lights when AC power to the unit is ON. If both
power switches A and B are turned on, this indicator
will light green. If either power switch A or B is
turned on, it will light red. If the control surface is in
the process of starting up, or if one or both power
switches remain turned on after the control surface is
shut down, the indicator will light orange.
6 [SYSTEM] key
Press this key to display information about the
RIVAGE PM series system on the touch screens.
Press and hold down the key for two seconds or
longer to shut down the control section of the console
(see page 23). Be sure to shut down before turning off
the power switches.
7 MONITOR A/B [LEVEL] knobs
Adjust the output level of the monitoring signals.
RANGE
AB
AB
GAIN
ENCODER
ASSIGN
HOME
VIEW
ASSIGN
SENDS ON
FADER
123456789101112
123456789101112123456789101112
USER DEFINED
KEY
THRESHOLD
ATTACK
ATTACK RELEASE
DECAYHOLD
KNEE
RATIO OUTGAIN
TOUCH AND TURN
E2
123456789101112
123456789101112
USER DEFINED
KEY
E1
GAIN
GAIN
GAIN
SENDS ON
FADER
SENDS ON
FADER
123456789101112
TALKB AC K
MONITORUSER DEFINED KEYS
1234
5678
9101112
1234
5678
9101112
BANK
CC
/ BANK
D
/
SYSTEM
POWER
A
B
USB
RECORDING
ON
DECDEC INCINC
OVERLAY UNDO
SCENE MEMORY
UPDATE PREVIEW
STORE RECALL
TALKBACK
MONITOREYS
1234
5678
9101112
BANK
D
/
SYSTEM
POWER
A
B
USB
RECORDING
ON
5
6
7
1 2
34