User Manual
Table Of Contents
- Contents
- PORT NAME
- Improved CH COPY operation
- More metering points available
- DaNSe
- MIX TO INPUT
- SUB IN
- Improved channel name indicators
- Improved scene operations
- Improved DCA operations
- Improved setting operations in the CUSTOM FADER BANK popup window
- Improved sync operations
- Warning against loading a conflicting system configuration
- Increased loadable items
- Improved EQ functions
- Additional options for the parameter set and copy function
- Additional library screen function
- DSP latency display
- Improved RTA display
- Flashing ON buttons
- [ON] KEYS FUNCTION DURING SOF
- A new [SHIFT] key function
- Improved keyboard input
- Improved RIVAGE PM Editor
- New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys
- New messages
CONTENTS
Improved scene operations
16 RIVAGE PM series V3 Supplemental Manual
■ Improving the SCENE LIST screen
1 LINK TO SURFACE button
Turn on this button to scroll a scene list without affecting the scene number display on the
menu bar and operation panel.
2 CURRENT SETTING field
Previously, the CURRENT SETTING field enabled you to specify the content that would be
stored by the next scene store operation. However, we deleted this field to prevent important
settings (such as the Focus setting) from being overwritten.
Also, the CLEAR MIX DATA button has been moved to the right side of the screen to avoid
accidental operation.
■ Improved Global Paste-related operation
Improvement to the GLOBAL PASTE screen now enables you to select parameters more easily and
recall libraries and presets.
GLOBAL PASTE screen
1 LIBRARY button
Press this button to open the library window. The library screen data is shared by Global Paste
and FOCUS.
2 ALL ON/ALL OFF button
Switches all settings on or off.
3 SET BY SEL button
If this button is on, you will be able to add a channel as a Global Paste target by using the
corresponding channel [SEL] key.
4 Preset buttons
You can assign a set of Global Paste targets to each of these eight buttons. Press the selected
preset button again to access the NAME EDIT popup window.
5 DESTINATION SCENE
This section now indicates the scene selected most recently in the paste destination for each
BAY. This will be erased once the unit is powered off.
1
2
3
4
1 2
5