User Manual
Table Of Contents
- Contents
- PORT NAME
- Improved CH COPY operation
- More metering points available
- DaNSe
- MIX TO INPUT
- SUB IN
- Improved channel name indicators
- Improved scene operations
- Improved DCA operations
- Improved setting operations in the CUSTOM FADER BANK popup window
- Improved sync operations
- Warning against loading a conflicting system configuration
- Increased loadable items
- Improved EQ functions
- Additional options for the parameter set and copy function
- Additional library screen function
- DSP latency display
- Improved RTA display
- Flashing ON buttons
- [ON] KEYS FUNCTION DURING SOF
- A new [SHIFT] key function
- Improved keyboard input
- Improved RIVAGE PM Editor
- New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys
- New messages
CONTENTS
DSP latency display
24 RIVAGE PM series V3 Supplemental Manual
Latency values based on the Delay Compensation setting inside the DSP engine are now displayed.
DELAY COMPENSATION popup window
This popup window indicates the values of signal latency (msec) occurring during the route from
the DSP engine through inputs to each bus output. The more the Delay Compensation is applied,
the higher the latency values will result. The values also vary depending on the Fs (sampling
frequencies).
MIX .............................Latency from INPUT to MIX OUT
STEREO......................Latency from INPUT to STEREO OUT
MATRIX.....................Latency from INPUT to MATRIX OUT
These values do not include the A→D, D→A or network latency.
A new OFFSET knob and a linear display enable you to identify even a soft audio signal.
RTA popup window
1 OFFSET knob
Specifies the offset value for the RTA display.
DSP latency display Improved RTA display
1