User Manual
Table Of Contents
- Contents
- PORT NAME
- Improved CH COPY operation
- More metering points available
- DaNSe
- MIX TO INPUT
- SUB IN
- Improved channel name indicators
- Improved scene operations
- Improved DCA operations
- Improved setting operations in the CUSTOM FADER BANK popup window
- Improved sync operations
- Warning against loading a conflicting system configuration
- Increased loadable items
- Improved EQ functions
- Additional options for the parameter set and copy function
- Additional library screen function
- DSP latency display
- Improved RTA display
- Flashing ON buttons
- [ON] KEYS FUNCTION DURING SOF
- A new [SHIFT] key function
- Improved keyboard input
- Improved RIVAGE PM Editor
- New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys
- New messages
CONTENTS
PORT NAME
4 RIVAGE PM series V3 Supplemental Manual
■ Setting screen
PORT NAME tag on the SYSTEM CONFIG screen
1 Network select tab
Press this tab repeatedly to select the network for the device from:
TWINLANe, DANTE, or DSP/CS.
2 Device select buttons
Press one of these buttons to select a device to edit.
3 Device label
Press here to enter the device name.
4 Slot list
Press a slot label to enter the slot name.
5 Port list
Press a port label to enter the port name.
6 List select knob
Use the corresponding screen encoder or the [TOUCH AND TURN] knob to select a slot or
port.
7 Keyboard button
Press this button repeatedly to toggle between the direct input and the input from the NAME
EDIT popup window.
8 DEVICE SYNC/DANTE SETUP popup button
Press this button to access the DEVICE SYNC popup window in which you can sync port name
or other labels.
NOTICE
To apply the labeled names, you must synchronize the
data from the control surface to the connected device.
If you synchronize the data in the opposite direction,
the labeled name will be overwritten.
If you selected a Dante network, the DANTE SETUP
popup window will be displayed.
If the THIS CONSOLE button is turned on, the labeled
names on the control surface will take effect and
overwrite those labeled on the device. If the DANTE
CONTROLLER button is turned on, the names
labeled on the device will become effective.
76
8
1
3
2
4
5