User Manual

HY128-MD Owner’s Manual
12
Input SRC Clock
Select the reference clock for input SRC. This setting is invalid when the
Input SRC ON/OFF setting is off.
Output SRC ON/OFF
Select whether to turn SRC on or off for MADI output signals.
Output SRC Clock
Select the reference clock for output SRC. This setting is invalid when the
Output SRC ON/OFF setting is off.
SW705 are not used.
SW703
Settings
3 (MADI 1)
4 (MADI 2)
OFF The clock synced to the MADI input signal (default setting)
ON Clock input from the [WCLK IN FOR SRC] connector
SW704
Settings
1 (MADI 1)
2 (MADI 2)
OFF SRC off (default setting)
Outputs the MADI signal synced to the device’s clock on which this card is
installed.
ON SRC on
Outputs the MADI signal synced to the output reference clock. The output
reference clock is set in Output SRC Clock.
SW704
Settings
3 (MADI 1)
4 (MADI 2)
OFF The clock synced to the MADI input signal (default setting)
ON Clock input from the [WCLK IN FOR SRC] connector