User Manual

Table Of Contents

HY128-MD Owner’s Manual

3 COAXIAL 1 IN/OUT connectors

COAXIAL 2 IN/OUT connectors

These are BNC connectors used for connecting MADI-compatible devices.

Each connector can input or output audio signals, up to a maximum of

64 channels.

NOTE

Cables of up to 100 meters (theoretical value) can be used.

4 WCLK IN FOR SRC connector

This is a BNC connector used to directly input the word clock signal for the

SRC. The indicator will turn on when a valid word clock input is detected,

and will flash when the word clock input is invalid.

5 Software Control

This switch selects whether to change the HY128-MD settings with a control

surface or the DIP switches.

SW251 (SOFT CTRL) Settings

ON (Enable) For changing the settings with the control surface (default setting)

OFF (Disable) For changing the settings with the DIP switches on the card