User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 6 Tree View window
Amp Editor Owner’s Manual
106
2. From the [Device List], select the device that you want to add, and click the [Add] button.
The selected device will be added to the [Device] area at the right.
• You can also add a device by double-clicking a device shown in [Device List].
• By clicking the [Add Range...] button you can add multiple devices of the same model.
• If you want to change the ID of the device you added, click the ID column to select an ID.
3. Click the [OK] button.
A new device will be added below the specified workspace.
Copying settings
You can copy the settings of an amplifier that is listed in the tree. You can select from two copy types: [All cur-
rent parameters], which enables you to copy all settings other than those unique to the device, such as a Device
ID; and [Selected parameters], which enables you to copy the selected settings.
Copying “All current parameters”
1. Right-click the icon of the amplifier whose settings you want to copy.
2. From the context menu, choose [Copy] [All current parameters].
All parameters other than those listed below will be copied.
Scene, Device ID, device name, Utility settings, Log Setup, Global Link, Solo and MY-Card (TXn only)
NOTE