User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Amp Editor Owner’s Manual
144
Chapter
9
Signal Path View window (TXn only)
In the Signal Path View window, the audio signal processing functions of the TXn’s internal DSP are
placed in the signal path as modular components.
To open the Signal Path window, use one of the following procedures.
Click the [Signal Path View] button in the Device Detail View window.
Select a TXn icon in the Tree View window, then click the [Signal Path View] button in the Tree View
window.
Right-click a TXn icon in the Tree View window and choose [Show] [Signal Path View].
• The signal path display will change depending on the Input Redundancy mode and the Power Amp
mode.
• The Gain/Sens. indication will change depending on the Gain Setting mode.
• The various meter displays will detect the level and move in realtime.
• When you click the [Device Detail View] button, the Device Detail View of the Detail View window will
appear.
• Points 1–8 in the signal path indicate output points to the Output Router.
• When you click the [Limiter] button, the [Limiter] tab of the Device Properties window will appear (page
133).
• When you click the [Gain/Sens.] button, the [Redundancy] button, or the [Amp Mode] button, the [Gen-
eral] tab of the Device Properties window will appear (page 127).
NOTE