User Manual
Table Of Contents
- Cover
- What is Amp Editor?
- Special Notices
- Contents
- Preparing for operation
- An overview of Amp Editor
- Setup
- Basic operations in Amp Editor
- Main panel window
- Objects in the window and their function
- Menus in the main panel window
- Preferences
- Event Log
- Device Information
- Scene Manager
- Alert Setup
- Word Clock (TXn only)
- Speaker Processor Library Manager (TXn only)
- Clock
- Language (TXn only)
- GPI (ACD1 only)
- Utility
- IP Address
- IP Control Port No.
- Firmware Update (Updating the internal firmware)
- Scene Link Manager (for devices other than XMV)
- Network Setup
- Synchronization (Synchronization with devices)
- Custom Control Panel Manager
- System View Creator
- Speaker Processor Library Converter
- Tree View window
- Detail View window
- Device Properties window
- Signal Path View window (TXn only)
- Component editor (TXn only)
- Custom control panels
- Appendix
Chapter 5 Main panel window
Amp Editor Owner’s Manual
88
Recovery Update
If necessary, you can recover the firmware of a device. If the power turns off while a firmware update is being
executed, the firmware will become unbootable; if this occurs, use Recovery Update to recover.
• Before you continue, you’ll need to download the firmware that you want to use for the recovery update
and the firmware that you want to use for the firmware update, and decompress the compressed file.
1. Power-on the device.
2. Using the “Network Setup” dialog box (page 91) or a DHCP server, assign an IP address
to the device.
3. Click the [Device] menu item [Firmware Update] [Recovery Update...].
A folder selection dialog box will appear.
4. Select the folder that contains the update file, and click the [OK] button.
The “Recovery Update” dialog box will appear. The name of the device connected offline, the current
firmware version, and the IP address will be displayed.
5. Select the check box of the device that you want to recover.
If you click the [Select All] button, all devices will be selected. If you click the [Clear All] button, the
check boxes of all devices will be cleared.
6. Click the [Update] button.
The firmware recovery will begin.
• Do not disconnect the Ethernet cable or power-off the devices while the recovery is pro-
ceeding.
7. When the recovery is completed, execute Firmware Update (page 86) in order to recover
the data other than the firmware.
NOTE
CAUTION