User Manual

Specifications
TX6n/5n/4n Owner’s Manual
17
(*1) Output power depends on the power supply voltage. These figures are based on 230V.
If the power supply voltage is 220V, output power will be about 8% less than the power shown in the table. Output power will be about
7% more in case of 240V.
(*2) 1/8 power = 9dB below rated power
(*3) Half power = 3dB below rated power
(*4) 0dBu = 0.775Vrms
Trademarks notice :
Neutrik
®
, Speakon
®
are used for information only and are the property of their respective companies.
Connectors Analog input In XLR-3-31 type x 2
Thru XLR-3-32 type x 2
AES/EBU input/output In XLR-3-31 type x 1
(2 channels, 24-bit 96kHz – 44.1kHz)
Thru XLR-3-32 type x 1 (2 channels)
Out XLR-3-32 type x 1
(2 channels, 24-bit 96kHz – 44.1kHz)
Speaker output Neutrik
®
Speakon
®
NL4 x 2,
5-way binding post x 2 pairs
Ethernet RJ45 x 1
Fault output Euroblock connector (3P) x 1
Indicators LCD 160 x 64 Full dot type
LED POWER x 1 (White)
STANDBY x 1 (Orange)
PARALLEL x 1 (Orange)
BRIDGE x 1 (Green)
PROTECTION x 1 (Red)
NETWORK x 1 (Green)
IDENTIFY x 1 (Blue)
SIGNAL x 1 (Green)
CLIP x 1 (Red)
ALERT x 1 (Orange)
MUTE x 2 (Red)
Load Protection POWER switch ON / OFF mute
DC-fault : Amplifier shuts down automatically.
Clip limiting : THD ≥ 0.5%
Amplifier Protection Thermal : Output mute (heatsink temp. ≥
90˚C) (return automatically.)
VI limiter(RL ≤ 1Ω) : Limit the output
Power Supply Protection Thermal : Amplifier shuts down automatically.
(heatsink temp. ≥ 100˚C)
Cooling Variable speed fan : x 2
Power Requirements 120V, 220V–240V; 50Hz/60Hz
(120V models use 30A twist lock connector)
Power Consumption TX6n: 1800W, TX5n: 1600W, TX4n: 1500W
Power Cord Length 1.5m
Dimensions (W x H x D) 480 x 88 x 461 mm
(18-7/8" x 3-7/16" x 18-1/8")
Weight 16.0 kg (35.3 lbs)
Operation free-air Temperature Range 0˚C to +40˚C
Storage Temperature Range -20˚C to +60˚C
Accessory Handle x 2 (with flat-head screw x 4), Eurob-
lock connector (3P) x 1, Rubber feet x 4,
Owner’s Manual