English Deutsch Español Manuel dʼinstallation FR Guía de instalación ES Guia de instalação PT Guida all'installazione IT Руководство по установке RU ᆿ㻻 ZH 施工説明書 JA Português DE Italiano Installationshandbuch Русский EN 中文 Installation Guide 日本語 VXL1B-24 VXL1W-24 VXL1B-16 VXL1W-16 VXL1B-8 VXL1W-8 Français SPEAKER SYSTEM
PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Do not open • Do not disassemble or modify this device (painting excepted). Doing so may cause electrical shock, fire, injury or malfunction.
PRECAUTIONS Handling caution • Do not hang heavy objects from this device. Avoid applying excessive force to the switches or connectors to prevent injuries. • Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire. • Do not input excessively loud signals that may result in clipping in the amplifier or cause the following: - Feedback, when using a microphone - Continuous and extremely loud sound from a musical instrument, etc.
Contents Introduction PRECAUTIONS............................................................................2 Thank you for purchasing the VXL1 Series Yamaha speaker system. NOTICE...................................................................................3 Information..............................................................................3 Contents.......................................................................................4 Introduction..........................................
Introduction Included accessories Optional accessories Speaker transformer ST-L1B ST-L1W Mounting bracket x 2 (for VXL1-8 only: x 1) Speaker x 1 Safety wire x 1 Port cover x 2 (for VXL1-24, VXL1-16) Port cover x 1 (for VXL1-8) Bracket base x 2 (for VXL1-8 only: x 1) Terminal cover x 2 Vertical coupling bracket VCB-L1B Installation Guide Installationshandb uch Manuel dʼinstalla tion Guía de instalació n Guia de instalaçã o Guida all'installa zione Руководство по установк е 安装指南 施工説明 書 Template x
Installing the speakers You can use the included mounting bracket to install the speaker on a wall. Before installation, make sure the installation area can support the weight of the speaker. Do not install on plasterboard. NOTICE 1 Attaching the bracket base to the wall 1-1 Place the included template on the wall, to decide where the holes should go for the screws and cables. 1-2 Make holes in the wall for the cables, and pull the cables from the amplifier out through the holes.
Installing the speakers 2 Installing the mounting bracket and safety wire onto the speakers 2-1 Install the mounting bracket onto the speaker using the included screws. Position both the upper and lower part of the mounting bracket at the third hole to install (see the figure below; only VXL1-8 have one location). Install the safety wire at the topmost hole position. CAUTION Screw hole for safety wire installation • Use the included safety wire.
Installing the speakers 3 Setting the directionality (VXL1-24, VXL1-16 only) 3-1 Set the directionality by using a flat head screwdriver to operate the Vertical Coverage Selector on the back of the speaker. 4 Connecting the cables 4-1 Remove the Euroblock plug from the speaker. NOTE Although there are two different speaker connectors for top and bottom, they are the same (connected in parallel internally). You can use either one.
Installing the speakers 4-3 Attach the safety wire to the wall. 5 Installing the main speaker unit onto the wall 5-1 CAUTION Attach the safety wire at a position higher than the speaker, where it does not sag too much. 4-4 Bring the connected Euroblock plug back to the socket on the main unit. Fit the bracket base together with the mounting bracket by inserting from the top, making sure to insert the mounting bracket all the way until the parts lock together.
Installing the port cover If you require waterproofing equivalent to that of the IP35, install the port cover that is included with this product. 3 Remove the four screws from the bass reflex port. There are two bass reflex ports (top and bottom) on the VXL1-24/VXL116. CAUTION Use gloves or other protective wear when removing the grille, in order to avoid cutting your hands on the grille edges. 1 Remove the four screws on the top and bottom sides of the speaker, and remove the top and bottom panels.
Installing the port cover (For VXL1-8) Insert the port block into the bass reflex port, and then align the port cover and fasten it in place using the screws that you removed. NOTE Insert the port block so that it fits into the port. 0.8 N·m 0.8 N·m 5 Put the grille back on the speaker. When doing this, align the edges of the speaker with the position of the grille to fit the grille in place. 6 Fasten the top and bottom panels in place using the screws that you removed.
产品中有害物质的名称及含量 Information for users on collection and disposal of old equipment: 有害物质 部件名称 铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 外壳、 框架 × ○ ○ ○ ○ ○ 印刷线路板 × ○ ○ ○ ○ ○ 电缆类 × ○ ○ ○ ○ ○ 扩音装置 × ○ ○ ○ ○ ○ 本表格依据 SJ/T 11364 的规定编制。 ○ : 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。 × : 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。 此标识适用于在中华人民共和国销售的电 器电子产品。标识中间的数字为环保使用 期限的年数。 This symbol on the products, packaging, and/or accompanying documents means that use
Informations concernant la collecte et le traitement des déchets d’équipements électriques et électroniques Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits électriques ou électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels.
Important Notice: Guarantee Information for customers in European Economic Area (EEA) and Switzerland English For detailed guarantee information about this Yamaha product, and Pan-EEA* and Switzerland warranty service, please either visit the website address below (Printable file is available at our website) or contact the Yamaha representative office for your country.
ADDRESS LIST NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Toronto, Ontario, M1S 3R1, Canada Tel: +1-416-298-1311 U.S.A. Yamaha Corporation of America 6600 Orangethorpe Avenue, Buena Park, CA 90620, U.S.A. Tel: +1-714-522-9011 CENTRAL & SOUTH AMERICA MEXICO Yamaha de México, S.A. de C.V. Av. Insurgentes Sur 1647 Piso 9, Col. San José Insurgentes, Delegación Benito Juárez, México, D.F., C.P. 03900, México Tel: +52-55-5804-0600 BRAZIL Yamaha Musical do Brasil Ltda.
雅马哈乐器音响(中国)投资有限公司 上海市静安区新闸路1818号云和大厦2楼 客户服务热线 : 4000517700 公司网址 : https://www.yamaha.com.cn 制造商 : 雅马哈株式会社 制造商地址 : 日本静冈县滨松市中区中泽町10-1 进口商 : 雅马哈乐器音响(中国)投资有限公司 进口商地址 : 上海市静安区新闸路1818号云和大厦2楼 原产地 : 印度尼西亚 Yamaha Pro Audio global website https://www.yamaha.com/proaudio/ Yamaha Downloads https://download.yamaha.