User Manual
Chapter 5 Main panel window
Amp Editor Owner’s Manual
51
Scene Manager
What is a scene?
Settings such as power Standby/On and muting can be named and saved for each amplifier as a “scene.” The
operation of saving a scene is called “scene store.” You can store multiple sets of parameter settings for different
situations, and recall them as necessary.
The operation of recalling a scene (to make it the current scene) is called “scene recall.” To recall a scene, use the
“Scene Manager” dialog box.
Each amplifier has one preset memory and 49 user memories. Scene #00 is a read-only scene that returns the
amplifier to its initial settings, and is specified by default in the preset memory. Scenes #01–#49 are user memo-
ries to which you can store settings.
• The XMV does not support scenes.
“Scene Manager” dialog box
To access the “Scene Manager” dialog box, click the [Device] menu command [Scene Manager], or right-click a
device icon in the workspace of the Tree View window and choose [Scene Manager] from the shortcut menu that
appears. Here you can store, recall, or edit scenes. You can edit the scene name, the protect setting, and perform
copy and paste editing.
• When online, editing operations such as store/recall and rename can be performed, but operations such
as copy and paste cannot be performed.
• The “Scene Manager” dialog box does not have an [OK] button or [Cancel] button. To close the dialog
box, click the [Close] button located at the upper right of the dialog box.
• Editing operations such as storing or recalling a scene or editing the name or content are applied imme-
diately to the device.
• You can leave this dialog box opened, and make the Detail View window active to edit various settings
of the amplifier.
NOTE
NOTE
Scene list