User Manual
Table Of Contents
- System Requirements
- Installation
- Installing Speaker Data
- Uninstalling
- Table of Contents
- 1. Y-S3 General Operation
- 2. Constructing the Room Shape & Audience Area
- 3. Editing Project Properties
- 4. Placing Speakers
- 5. Adjusting Speaker Parameters
- 5-1. Speaker Arrays
- 5-2. Distributed Speakers
- 6. Displaying Calculation Results
- 7. Simulation Results Report
- 8. Exporting Configurations in DME Designer Format
- 9. Other Functions
- 10. General Theory
Yamaha Sound System Simulator Y-S
3
Owner’s Manual V3.1
37
Delay Component
Double-click to display the delay setting window. Refer to the end of this chapter for information on the delay
setting window.
EQ Component
Double-click to display the EQ setting window. Refer to the end of this chapter for information on the EQ
setting window.
Speaker Processing Component
Click to turn phase-rotation on/off.
Click to turn the 90 Hz cut-off frequency high-pass filter on/off. Use this when combining full-range speakers with
subwoofers.