User Manual
Table Of Contents
- Contents
- What you can do using ProVisionaire Control
- Operating requirements of the software
- Terms and concepts to understand
- Installation procedure
- Screen structure
- Basic process
- Start up, and register devices
- Placing widgets on a page
- Labeling widgets for easier recognition
- Adding a page
- Specifying a background for the page
- Adjusting the placement of the widgets
- Saving the project file
- Testing operation
- Making security settings
- Creating a controller file
- Making KIOSK start automatically
- Adding parameters or meters for an MTX/MRX system
- Functions specific to initial mode
- Title bar
- Menu bar
- Tool bar
- “Controllers” area
- “Devices” area
- “Widgets” area
- Work area
- “Properties” area
- Widgets
- Dialog boxes and windows
- “Setup” dialog box
- “New Project Wizard” dialog box
- “Add Controller” dialog box
- “Run Controller File” dialog box
- “Import Controller File” dialog box
- “Select Controllers to Import” dialog box
- “Export Controller File” dialog box
- “Imported Images” dialog box
- “Add Device” dialog box
- “Target Editor” dialog box
- “Edit Text” dialog box
- “Edit Device Identifier” dialog box
- “Select Image” dialog box
- “Style” dialog box
- “System Monitor” window
- “ProVisionaire Monitoring Service Settings” view
- Specifying the IP address
- Tips
- Troubleshooting
13
4. Make settings as appropriate for the screen device
used to operate the controller (the screen of the com-
puter on which KIOSK is installed), and click the
[Next] button.
In this example, we keep the default settings. Items other than [Type]
and [Aspect ratio] can be changed later.
NOTE
For the controller used with ProVisionaire Touch KIOSK, select “Pro-
Visionaire Touch Kiosk” with the “Type” radio button.
Widgets that are not in ProVisionaire Touch can not be placed.
Tips
If you don’t know the aspect ratio of the screen, select [3:2] and
place the widgets accordingly.
After specifying the aspect ratio, create the appropriate controllers.
For each page, you can use the method of using <Ctrl>+<A> to
select all widgets, then using <Ctrl>+<C> to copy them, then
<Ctrl>+<V> to paste them on the new controller page, and then
rearranging them.
5. Make the following settings, and click the [Add] but-
ton.
“Device Type”=[Digital Mixers]
“Model”=[CL5]
“Match Device by”=[Unit ID]
“Unit ID”=[1]
“Count”=[1]
The CL5 with ID=1 is added to the “Devices” area, and the dialog
box closes.