User Manual

8
YDS-150 Owner’s Manual
Controls and Functions
Front side
Left side
q Mouthpiece set
For use exclusively with this instrument.
w Keys
(Fingering Chart: page 20)
e Bell
There is a water drain inside the bell. Water condensation
and excess breath moisture can be drained from here.
r 5 V DC-IN/USB TO HOST terminal
Micro USB Type-B terminal.
For connection to a USB power adaptor, USB mobile
battery, or PC with a USB cable.
t PHONES jack
For connecting a pair of stereo headphones or other
equipment with a mini stereo phone plug (3.5 mm). The
instrument’s built-in speakers automatically stop pro-
ducing sound when plugged in.
y AUX IN jack
For inputting the sound of an audio player and listening
to it through the built-in speaker of the instrument (with
a 3.5 mm, mini stereo phone plug). To adjust the input
volume from the [AUX IN] jack, adjust the audio play-
back volume on the audio device.
Left side
NOTICE
• Use a USB A to micro B cable of less than 3 meters.
Do not use a USB 3.0 cable.
• To prevent hearing loss, avoid using headphones
at high volumes for extended periods of time.
• Before connecting the instrument to other elec-
tronic components, turn off the power for all com-
ponents. Before turning the power on or off for all
components, set all volume levels to minimum.
This can cause permanent hearing loss.
• To avoid possible damage, first turn on the
power for the external device, and then for the
instrument. When turning off the power, first turn
off the power for the instrument, and then for the
external device. This can cause permanent hear-
ing loss.
NOTE
• Use audio cables and adaptor plugs that have no series
resistors.
• The input audio signals via the AUX IN jack, the USB
TO HOST jack, and the Bluetooth connection can only
be heard on devices connected to the PHONES jack.
CAUTION
CAUTION