User Manual
Table Of Contents
- System Requirements
- Installation
- Installing Speaker Data
- Uninstalling
- Table of Contents
- 1. Y-S3 General Operation
- 2. Constructing the Room Shape & Audience Area
- 3. Editing Project Properties
- 4. Placing Speakers
- 5. Adjusting Speaker Parameters
- 5-1. Speaker Arrays
- 5-2. Distributed Speakers
- 6. Displaying Calculation Results
- 7. Simulation Results Report
- 8. Exporting Configurations in DME Designer Format
- 9. Other Functions
- 10. General Theory
Yamaha Sound System Simulator Y-S
3
Owner’s Manual V3.1
40
• Picture of speaker array (Speaker Property - Picture)
You may check the 3D diagram of the speaker array selected in the Speaker List in the current settings. The gray area
indicates the back of the speakers. When you open the Picture view, the view angle is synchronized with Aspect View.
Click and in Aspect View to check speaker placement visually.
• Auto tuning
Set the service area on the receiving surface for each installed speaker array, and to automatically adjust the angle,
splay angle, EQ, and other figures you have entered, while leaving the speaker arrays in the position you assigned
them. This is applied to those speakers that are selected in Speaker List and appear in Speaker Property. Although
you cannot select mirrored speaker arrays, they will be moved and their EQ settings changed to match those of their
mirror originals.
Click in Speaker Property to open the Service Area Selection & Auto tuning Parameters window.