User Manual

Assembly Guide
DTX400K/DTX430K/DTX450K Owner’s Manual
14
The details of are different for the DTX400K, DTX430K, and DTX450K.
Attaching the snare
pad
1. Loosen the wing bolt on the joint on
the left arm, which was attached in
.
2. Rotate the joint 90° counter-clockwise, making the joint
section horizontal.
3. Securely tighten the wing bolt.
4. Loosen the  key bolt on the joint.
5. Take the snare pad (i) from the package and slide it
fully into the joint.
6. Tighten the  key bolt to secure the snare pad (i) in
place.
Attaching the snare
pad
1. Loosen the wing bolt on the joint on
the left arm, which was attached in
.
2. Rotate the joint 90° counter-clockwise, making the joint
section horizontal.
3. Securely tighten the wing bolt.
4. Loosen the  key bolt on the joint.
5. Take the hexagonal rod (u) from the package and slide
it fully into the joint.
6. Tighten the  key bolt to secure the hexagonal rod (u)
in place.
7. Take the snare pad (i) and the S wing bolt (o) from
the package and lightly tighten the S wing bolt (o).
(Five or six turns is sufficient.)
8. Place the snare pad (i ) on the hexagonal rod (u),
which was attached in
6. above, and slide it fully back.
Then tighten the S wing bolt (o) to secure the snare
pad (i) in place.
9. Loosen the  key bolt and adjust the angle of the snare
pad. When finished, retighten the  key bolt to secure
the snare pad in place.
Step 7
For DTX430K Owners For DTX450K Owners
Step 7
Step 4
Left arm
Wing bolt
Joint
90°
i
i
Step 7
Step 4
Left arm
Wing bolt
Joint
90°
u
o
i
u
i
o