User Manual

10
RS502 Owner’s Manual
2. Attach a tom holder to each of the three tom clamps.
2-1. Loosen the bolt on the tom clamp.
2-2. Insert the tom holder.
2-3. Securely tighten the bolt on the tom clamp.
3. Attach a cymbal holder to each of the two cymbal clamps.
3-1. Loosen the bolt on the cymbal clamp.
3-2. Insert the cymbal holder.
3-3. Securely tighten the bolt on the cymbal clamp.
CAUTION
Take special care with tom holders as they have sharp tips that could cause injury.
NOTE
When tightening the bolt, ensure that the black sleeve is positioned inside the clamp’s mounting hole and securely held.
To m c l a mp
Tom holder
Bolt
Cymbal holder
Bolt
Cymbal holder
Bolt
Cymbal clampCymbal clamp
Sleeve (black)
 On the left arm  On the right arm
Sleeve (black)