User Manual

5
RS502 Owner’s Manual
1. Lay the main frame down on a solid, level surface and loosen the screws in clamps q and w using the
tuning key.
2. Loosen the bolts on clamps q, w, and e and move the clamps all the way down to the center strut.
Following this, lightly tighten the clamp bolts.
3. Take the left arm from the package and loosen the screw in clamp r using the tuning key.
Assembling the Rack
NOTE
The tuning key can be found in the pad set package.
The left and right arms look very alike, but the left arm is longer. Take care not to mix them up when
assembling the rack.
Clamp q Clamp w
Screw
Screw
Tuning key
Tuning key
Clamp q
Clamp e
Center strut Clamp w
Loosen
Bolt
Lightly
tighten
Left arm Clamp r
Screw