User Manual

7
RS502 Owner’s Manual
8. Take the right arm from the package and push it as far as it will go into clamp w.
When inserted, ensure that the arrow sticker (  ) on the right arm is lined up with the slit in clamp w.
9. Securely tighten the screw in clamp w using the tuning key.
10. Loosen the bolt on clamp t.
11. Take the right leg from the package and insert it into clamp t.
When inserted, ensure that the right leg protrudes from the clamp by approximately 7 cm.
12. Securely tighten the bolt on clamp t.
Right arm
Arrow
Clamp w
Slit
Screw
Clamp t
Right arm
Clamp w
Clamp t
Bolt
Clamp t
Right arm
Right leg
7 cm
Bolt