Owner's Manual

20
The Mix Recording function can be used to overdub a vocal part after recording
the guitar part.
* Before you start recording your guitar make sure its in tune. The SH-01 is equipped with a tuner that is
described on page 24.
● Recording a Guitar (Make a New Recording)
1
Connect your electric or electric/acoustic guitar to the SH-01’s INST. jack. If you playing an
acoustic guitar, you can either use the built-in microphones or connect a dynamic type mi-
crophone to the INST. jack to record audio. If the built-in microphones will not be used,
switch INTERNAL MIC switch to its “OFF” position. Also, connect a pair of headphones to
the LINE OUT/PHONES jack for monitoring. (→ page 15)
Try Out the Mix Recording Function
Using the SH-01
Effect Category Name
Effect Type
2
Using the step
2
of the same procedures described on page 17 and 18
• Play the guitar, and adjust the input level while monitoring through a pair of head-
phones.
At this point, preparation for recording the guitar is complete, but let’s try adding some of the
SH-01’s on-board effects to the guitar’s sound.
3
Press the [EFFECT] button to display the effect settings.
The Effect Category name will appear on the top half of the display and the Effect Type will
appear on the bottom half of the display.
OFF
CAT:BASIC
TYP:INTERNAL MIC