Owner's Manual

25
Using the SH-01
● Record the Vocal Part (Mix Recording)
In this step, we will overdub a vocal part onto the already recorded guitar part. But before
you record the vocal part, why don’t you try rehearsing along with the guitar part.
1
First switch the SH-01’s power off, then connect a vocal microphone (dynamic type) to the
INST. jack. Next, set the INTERNAL MIC switch to its “OFF” position. (→ page 14)
2
Switch the power ON.
* While the SH-01 is starting up, “YAMAHA SOUND SKETCHER” will appear in the display. Button
operation is not possible at this time.
The SH-01 selects the most recently recorded file.
Displaying File Information
If none of the buttons have been pressed after the SH-01’s power is switched ON, the main display (normal
display) shown below will appear. If you press the [DISPLAY/MENU] button you can scroll through the differ-
ent displays, as shown below, to confirm the original file’s settings for level, file information, and effect
settings before you start mix recording.8)
[Main Display]
[Level Display]
Record level (with peak hold)
[File Information Display]
File type
Bit rate
Stereo/Monaural
[Effect Display]
Name of the effect type currently se-
lected
UNDO´ mark
(displayed only when the UNDO operation
is available)
On the bottom half of the display, the file name and total time of the selected file is shown in all displays.
LEVEL ~~~~--------*
SONGå002 03:12
MP3 192k STEREO
SONGå002 03:12
TYP:INTERNAL MIC
SONGå002 03:12
02/02
SONGå002 03:12
02/02 ´
SONGå002 03:12
File number/Total number of files in the card