Owner's Manual

8
Nomenclature
q Display
The display shows data and information
needed when operating the SH-01. The
display’s contrast is adjustable. (→ page 39)
w POWER/PEAK Lamp
This lamp lights green when the SH-01
power is switched “ON” (when the SH-01 is
being operated).
The lamp lights red when the input source
level is too high.
When operating the unit with batteries and
battery power becomes low, the lamp will
flash green.
e INPUT Volume
Adjusts the volume level of the input source.
This control is also used to select charac-
ters when naming files. (→ page 32)
r PLAY Volume
Adjusts the volume level during playback
and adjusts the volume level of the original
file during mix recording.
This control is also used to select charac-
ters when naming files. (→ page 32)
t Built-in Microphone (MIC L, MIC R)
This is the unit’s built-in stereo microphone
system.
Use the INTERNAL MIC switch @7 on the
rear panel to switch the microphone ON/
OFF, and the GAIN switch @6 to switch the
gain level. (→ page 14)
y REC Button (S)
(This button is used to start a new record-
ing.)
Press the button and the unit goes into
record standby mode for recording a new
file.
@5 @6 @7 @8 @9 #0 #1
q
t
y
i
o
!0 !1
!2
@0
@1
!3
!4
!5
!7
!9
e
r
!8
!6
w
u
@2
@3
@4