User Manual

RIVAGE PM Series Firmware Update Guide 4
Updating the DSP-R10/DSP-RX/DSP-RX-EX and RPio622/RPio222
firmware.
The RIVAGE PM FIRMWARE UPDATER V3.0.0 (referred to hereafter as the RIVAGE PM FIRMWARE UPDATER) is
required to update the firmware of devices such as DSP-R10/DSP-RX/ DSP-RX-EX and RPio622/RPio222.
RIVAGE PM FIRMWARE UPDATER
The RIVAGE PM FIRMWARE UPDATER is software for updating the RIVAGE PM Series system firmware on the
computer.
The target devices are the following. (August/2020)
DSP-R10
RPio622
DSP-RX/DSP-RX-EX
RPio222
NOTE For the latest information about the target devices, refer to the following website.
https://www.yamahaproaudio.com/
Updating – Operation Overview
1 Verify that your computer meets the updating requirements of the firmware (page 4).
2 Connect your computer to the device (page 5).
3 Configure the network settings (page 9).
4 Update (page 10).
System Requirements
OS Windows 8.1, Windows 10
(Supports both 32-bit and 64-bit versions.)
OS X 10.9.5, OS X 10.10.x, OS X 10.11.x, macOS 10.12.x, macOS 10.13.x,
macOS 10.14.x, macOS 10.15.x, macOS 11.x
CPU Intel Core i3 or higher
HDD 100 MB or more