User Manual

CS-R5 Owner’s Manual

C SCENE MEMORY section

1 [OVERLAY] key

Press this button to display the OVERLAY SETTING

screen.

While pressing and holding down the [SHIFT] key

(see 5 on page 17), press the [OVERLAY] key to

switch Overlay on or off.

While Overlay is turned on, press and hold down the

[OVERLAY] key to enter Overlay edit mode.

2 [UNDO] key

Cancels the most recent scene operation of storing,

recalling or updating a scene.

After you cancel the operation by pressing the [UNDO]

key, you can “redo” the canceled operation by pressing

the [UNDO] key again.

NOTE

Using the [UNDO] key will not undo an operation to store a

new scene.

3 [UPDATE] key

Updates scene data by overwriting the current scene

(that has been recalled most recently) with the

current mix data.

4 SCENE MEMORY display

Indicates the selected scene memory.

5 [PREVIEW] key

Switches Preview mode on or off.

6 [STORE] key

Stores the current scene settings to the selected scene

memory. If you select the existing scene as the store

destination, it will be overwritten.

NOTE

Use the [UPDATE] key to overwrite the current scene.

7 [INC]/[DEC] keys

Enable you to select the scene number of a scene that

you want to store or recall.

NOTE

• If you select a scene other than the current scene, the

scene number on the LCD display will flash.

• Press the [INC] and [DEC] keys simultaneously to return

to the current scene.

8 [RECALL] key

Enables you to recall a selected scene from scene

memory.