User Manual

CONTENTS

Part names & functions

15 RIVAGE PM StageMix User Guide

INPUT PATCH screen

This screen appears when you tap the Input Assign area.

1 Channel select area

Tap < or > to select the previous or next channel. Tapping in the middle will open the SELECT CHANNEL screen.

2 BANK select buttons

Enable you to select Bank A or Bank B. The buttons will indicate the assigned patches.

3 HA INFO button

You can select TAKE FROM PORT or TAKE FROM CHANNEL. If you select TAKE FROM PORT, the HA parameter settings retained by

the patched port will be used as is. If you select TAKE FROM CHANNEL, the HA parameter settings retained by the input channel will be

copied to the destination port.

4 INPUT PATCH

Select a slot. The ports will be displayed on the right. Tap a port to select it.