User Manual

CONTENTS

Part names & functions

27 RIVAGE PM StageMix User Guide

■ PREFERENCE screen

This screen enables you to configure the StageMix application.

GENERAL section

1 Fader Delay

Enables you to adjust the amount of delay between when you touch a fader control to adjust the value and when the adjustment is actually

applied.

This setting helps prevent unintended fader control movement.

2 Fader 0dB Detent

If this switch is turned on, and you adjust a fader or pan, the fader or pan operation will stop at 0 dB or center. You can then continue to

drag it as desired.

3 Enable Inc/Dec Scene Recall

If this switch is turned off, the INC RECALL button and DEC RECALL button in the SCENE screen will be hidden.

4 Enable Phantom Power Switching

Enables or disables the +48 phantom power button that is displayed in the GAIN screen.

If this switch is turned on, the button will be highlighted in red. If this switch is turned off, the +48V button in the GAIN screen will be

disabled.

5 Set DCA to 0dB with Double-tap

If this switch is turned on, double-tapping a DCA fader knob will set it to 0 dB.

6 [ON] Keys Function during SOF

Determines whether the [ON] keys in SENDS ON FADER mode function as a SEND ON button (that turns the send for the specified

destination channel on or off), or a CH ON button (that turns the corresponding channel on or off).

7 Show Send Levels in Meter Bridge

Switches the level meters in SENDS ON FADER mode.

Send: Send level is displayed in the meter area.

Fader: Fader level is displayed in the meter area.

Off: Neither level is displayed in the meter area.

)

(