User Manual

CONTENTS
Part names & functions
28 RIVAGE PM StageMix User Guide
8 Disable Screen Auto-Lock
Turn this on to disable the iPad Auto-Lock function.
9 Display Delay Scale
Specifies the display delay scale.
) Frame Rate
If frame is selected for the delay scale, this rate determines the number of frame per second.
CONFIRMATION section
! Recall/Store/Update
If this switch is turned on, a confirmation message will be displayed when you recall, save, or overwrite a scene in the SCENE screen.
CH SELECT section
@ StageMix Follows Console
If this switch is turned on, the channel you select on the control surface will also be selected in StageMix.
# Console Follows StageMix
If this switch is turned on, the channel you select in StageMix will also be selected on the control surface.
$ Link Bay
Select the L, C, or R bay to link to the Selected Channel.
You can also use the Import function on the CUSTOM FADER BANK screen to load the settings for the selected bay.
CUE section
% Cue Operation Mode
Enables you to select the desired cue operation mode.
In Channel mode, the cue settings on the control surface will also be used in StageMix.
In Bay (StageMix) mode, select Cue A, Cue B, or Cue A+B.
^ Cue A Mode/Cue B Mode
Enable you to set Cue A and Cue B to one of the following modes. In Mix Cue mode, multiple channels will be monitored simultaneously.
In Last Cue mode, only one channel will be monitored.
& Solo in Place Mode
Turn on this switch to enable Solo in Place mode.
METERS section
* Input Meter Point/Output Meter Point
Determines the input/output level metering point.
RTA section
( Peak Hold Mode
Determines the type of peak hold displayed on the RTA graph.
Freeze: The RTA display freezes when you turn on the Hold button. The display refreshes when you turn off the Hold button.
All Peaks: The maximum value of each RTA frequency band is displayed in red.
High Peak: Only the frequency band with the highest value is displayed in red.
A Input Gain
Enables you to adjust the mic input gain of the iPad used for the RTA (Real-Time Analyzer).
B Number of Bands
Determines the number of frequency bands displayed on the RTA graph.