User Manual

CONTENTS

Part names & functions

30 RIVAGE PM StageMix User Guide

EQ screen

1 HPF/LPF buttons

Tap the buttons to turn the high-pass filter or low-pass filter on or off respectively. The button lights up when it is turned on.

2 EQ Type selector

Tap here to select an EQ type. Each type features a unique frequency curve

and a different color for a part of the outside frame of the graph.

PRECISE: gray

SMOOTH: blue

AGGRESSIVE: red

LEGACY: black

3 A/B (A/B/C/D) switch buttons

These buttons enable you to switch between A and B (or A, B, C, and D for input channels in Theatre mode) as the storing destination for

the EQ parameters.

4 EQ ON/OFF button

Tap this button to switch the EQ on or off. The button lights up when it is turned on.

5 EQ graph

Displays the parameter values for the EQ and filters. As you adjust the settings for each band and gain, the results are reflected in the

graph. You can drag the handles displayed in the graph to adjust the corresponding settings. When using the bell-type filter or if the EQ is

a shelving type in the PRECISE category, you can adjust the Q value by pinching the curve on the graph.

The parameters for the selected band are displayed in a popup over the handle.

In the popup, you can use the Bypass button to turn bypass on or off, and the Shelf button to turn shelving on or off. Turn on the Lock

button to fix the specified frequency and gain, and drag the handle.

You can reset the EQ gain to its default value by double-tapping the handle.

1 32 4