User Manual

RIVAGE PM Editor Installation Guide 4
System Requirements
NOTE The Minimum System Requirements described above are applied to the PM Editor version 2.0.2.
The system requirements may differ slightly depending on the particular computer.
Keep in mind that the software is often updated and the system requirements are subject to change. You can check the latest version
information of each program and its system requirements at the following website
https://www.yamaha.com/proaudio/
Installing the PM Editor
Follow the instructions below to install the PM Editor.
No additional software is needed to run the PM Editor.
1 Extract the downloaded file and double-click “setup.exe” (Windows) or “Yamaha RIVAGE PM
Editor Vx.x.x.pkg” (Mac).
The setup dialog of the PM Editor is displayed.
NOTE
• x.x.x represents the firmware version number.
• Click [Continue] or [Yes], if the “User Account Control” window appears.
2 Follow the on-screen instructions and install the software.
Installing the PM Editor and making the network settings
OS
Windows 7, Windows 8.1, Windows 10
OS X 10.9.x, OS X 10.10.x, OS X 10.11.x, macOS 10.12.x, macOS 10.13.x
CPU
Windows: Intel 64-bit processors running at 2 GHz or faster
Mac: Intel Core family processor
RAM
2 GB or more
HDD
1 GB or more
Display
1280 x 1024 or higher resolution, 16-bit or higher color depth
Others
Pointing device (mouse, etc.), Ethernet connection (1000BASE-T/100BASE-TX)