User Manual
Table Of Contents
- Contents
- PORT NAME
- Improved CH COPY operation
- More metering points available
- DaNSe
- MIX TO INPUT
- SUB IN
- Improved channel name indicators
- Improved scene operations
- Improved DCA operations
- Improved setting operations in the CUSTOM FADER BANK popup window
- Improved sync operations
- Warning against loading a conflicting system configuration
- Increased loadable items
- Improved EQ functions
- Additional options for the parameter set and copy function
- Additional library screen function
- DSP latency display
- Improved RTA display
- Flashing ON buttons
- [ON] KEYS FUNCTION DURING SOF
- A new [SHIFT] key function
- Improved keyboard input
- Improved RIVAGE PM Editor
- New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys
- New messages
CONTENTS
Flashing ON buttons
25 RIVAGE PM series V3 Supplemental Manual
In the SELECTED CHANNEL VIEW screen or METER screen, the ON buttons for the channels
muted in a mute group will flash.
You can now specify the behavior of the [ON] keys during SENDS ON FADER mode.
SURFACE SETTING2 screen
1 [ON] KEYS FUNCTION DURING SOF
• SEND ..............................Use the [ON] key to switch the send on or off.
• CHANNEL.....................Use the [ON] key to switch the channel on or off.
This is useful if a monitoring engineer wants to control channel on/
off all the time, even during SENDS ON FADER mode.
Flashing ON buttons [ON] KEYS FUNCTION DURING SOF
1