User Manual
Table Of Contents
- Contents
- PORT NAME
- Improved CH COPY operation
- More metering points available
- DaNSe
- MIX TO INPUT
- SUB IN
- Improved channel name indicators
- Improved scene operations
- Improved DCA operations
- Improved setting operations in the CUSTOM FADER BANK popup window
- Improved sync operations
- Warning against loading a conflicting system configuration
- Increased loadable items
- Improved EQ functions
- Additional options for the parameter set and copy function
- Additional library screen function
- DSP latency display
- Improved RTA display
- Flashing ON buttons
- [ON] KEYS FUNCTION DURING SOF
- A new [SHIFT] key function
- Improved keyboard input
- Improved RIVAGE PM Editor
- New functions added to the USER DEFINED keys, USER DEFINED knobs, and [Fn] keys
- New messages
CONTENTS
Improved CH COPY operation
9 RIVAGE PM series V3 Supplemental Manual
The copy source is a stereo channel pair and the copy destination is a mono channel:
*1 Excluding a Dual type and Stereo type
The copy source is a mono channel and the copy destination is a stereo channel pair:
*1 The GEQ link settings on the copy destination will not be changed.
*2 Excluding a Dual type and Stereo type
NOTE
During the copy operation, if any controls made from PM Editor interrupt a mounting or patching
process, or if the available resources are insufficient, an alert screen will appear.
Copy source Copy destination
31BandGEQ Copy 31BandGEQ on the L channel of the source and patch (On, Band/
Gain, Limit).
Flex15GEQ Copy the A side of the source and patch. (On, Band/Gain, Limit)
8BandPEQ Copy the A side of the source and patch. (On, Type, Band/Gain, Band/Q,
Band/Bypass, Band/Freq., Low Shel., High Shel.)
AutoMixer Assign one available channel. (Parameters will not be copied.)
OutBoard Select OutBoard as the copy destination. (No patching)
Effect If the copy source is a Stereo type, switch to a Dual type, and then copy
and patch (including parameters and bypass settings).
Copy and patch only the L channel (if the copy source is a normal type
*1
)
(including parameters and bypass settings).
BLANK Clear the insert module patch on the copy destination channel. (The DSP
allocation used on the copy destination will be retained.)
Copy source Copy destination
31BandGEQ Copy the source to both L and R channels and patch. (On, Band/Gain,
Limit)
*1
Flex15GEQ Copy the source to both L and R channels and patch. (On, Band/Gain,
Limit)
*1
8BandPEQ Copy the source to both L and R channels and patch. (On, Type, Band/
Gain, Band/Q, Band/Bypass, Band/Freq., Low Shel., High Shel.)
*1
AutoMixer Assign two available channels. (Parameters will not be copied.)
OutBoard Select OutBoard as the copy destination. (No patching)
Effect If the copy source is a Dual type, switch to a Stereo type, and then copy
and patch (including parameters and bypass settings).
If the copy source is a normal type
*2
, 1-in/1-out and 1-in/2-out Effects
cannot be copied, and leave a blank. Other than that, copy and patch both
L and R channels (including parameters and bypass settings).
BLANK Clear the insert module patch on the copy destination channel. (The DSP
allocation used on the copy destination will be retained.)