User Manual

1. 請按 （待機／開）按鈕以開啟電源
警告
注意
2. 按住 （待機／開） 按鈕至少一秒鐘以啟動待機模式。
警告
開啟電源／設定待機
如果總音量太低或聽不到聲音，請參閱第31頁的「疑難排解」。
[VAR] 指示燈
1.
開啟電源
調整音量
電源開啟時，[VAR]指示燈會亮紅燈。
演奏時可依照需求調整音量。
請勿以高音量或不適音量使用本樂器或耳機過久，可能會造成聽力受損。
開啟電源時，請勿嘗試任何其他操作，例如按壓琴鍵，可能會導致樂器故障 。
即使在待機模式下，仍有最低電流量導向本樂器。若長時間不使用本樂器，請務必從交流電插座拔除USB電源變
壓器，或從樂器中取出電池。
SHS-300 Owner’s Manual 13
) [FUNCTION] button
For setting various functions. While holding down this button, press the keys corresponding to the
function settings you want to change. See page 28 for details on the functions.
! VOLUME [-] button
Each button press lowers the overall volume of the instrument. Holding down the button lowers the
volume continuously.
@ VOLUME [+] button
Each button press raises the overall volume of the instrument. Holding down the button raises the
volume continuously.
NOTE
• The setting range is 0 – 15; the default setting is 13.
• To reset to the default setting, press the VOLUME [-] button and VOLUME [+] button simultaneously.
# [
P
] (Standby/On) button
Press this button to turn on the instrument; the 4 [VAR] lamp lights. Press and hold this button for
more than one second to put into standby mode.
$ [PHONES] jack
For connecting a pair of stereo headphones or other equipment with a mini stereo phone plug
(3.5 mm). The instrument’s built-in speakers automatically stop producing sound when plugged
in. This allows you to connect, for example, to an external amplifier to drive external speakers.
CAUTION
• To prevent hearing loss, avoid using headphones at high volumes for extended periods of time.
• Before connecting the instrument to other electronic components, turn off the power of all the
components. Also, before turning
any components on or off, make sure to set all volume levels to
minimum. Otherwise, damage to the components or electrical shock may occur.
B2 C3 D3 E3 F3 G3 A3 B3 C4 C5D4 E4 F4 G4 A4 B4
SHS-300 Owner’s Manual 13
! VOLUME [-] button
Each button press lowers the overall volume of the instrument. Holding down the button lowers the
volume continuously.
@ VOLUME [+] button
Each button press raises the overall volume of the instrument. Holding down the button raises the
volume continuously.
NOTE
• The setting range is 0 – 15; the default setting is 13.
• To reset to the default setting, press the VOLUME [-] button and VOLUME [+] button simultaneously.
# [
P
] (Standby/On) button
Press this button to turn on the instrument; the 4 [VAR] lamp lights. Press and hold this button for
more than one second to put into standby mode.
$ [PHONES] jack
For connecting a pair of stereo headphones or other equipment with a mini stereo phone plug
(3.5 mm). The instrument’s built-in speakers automatically stop producing sound when plugged
in. This allows you to connect, for example, to an external amplifier to drive external speakers.
CAUTION
• To prevent hearing loss, avoid using headphones at high volumes for extended periods of time.
• Before connecting the instrument to other electronic components, turn off the power of all the
components. Also, before turning
any components on or off, make sure to set all volume levels to
minimum. Otherwise, damage to the components or electrical shock may occur.
18 SHS-300 使用者手冊
PO1910027-shs300enomv071-p18.pdf12019/10/19下午11:19:11