User Manual

6
qw e rtyu
Controls and Functions
 Right side of this product
q
AUX IN jack
Use a commercially available audio cable to connect an
external audio player or other such device to the AUX IN
jack for playing along with audio from the external device.
* Use the volume control on the external audio device to
control its volume.
w
USB terminal
Micro USB Type-B terminal. For connection to a computer
or smart device with a USB cable. Refer to the page 10
for how to connect.
e
Sound mode switch
Changes the way you hear when you play an instrument.
[PLY] is a way of hearing that reproduces the state in
which you are playing an instrument (PLAYER mode).
Suitable for individual practice.
In [AUD], the listening method reproduces the state in
which you are listening to the performance in front of the
player (AUDIENCE mode). This is suitable for outputting
your performance to a computer or smart device.
r
Reverb dial
Adjust the reverb effect level.
t
Reverb type switch
Select the type of reverb (ROOM, HALL).
y
[ ] (Standby/On) switch
When sliding this switch to the “ • ” position to turn on this
product, the indicator lights in blue.
* Be sure to remove the stereo earphones and headphones
from your ears when operating this switch.

Enabling / Disabling Auto Power Off
To prevent unnecessary power consumption, the product fea-
tures an Auto Power Off function that automatically turns the
power off if the product is not operated for a specified period of
time (30 minutes). By default, this function is set to on; howev-
er, this setting can be changed with the following steps.
1. With the power turned off, slide the reverb type switch to
[HALL].
2. Within 1 second of turning on the power, slide the Reverb
Type switch from [HALL] to [ROOM] and quickly return it to
[HALL].
When set successfully, the power indicator flashes in red twice.
NOTE
The auto power off setting is not reserved in this product.
u
Clip
You can use this clip to attach this product to your belt or
pocket.